AirSync IEM Professional Wireless In Ear Monitors
- UHF technology (657-663 MHz) for stable, interference-free monitoring across up to 13 systems simultaneously
- Crystal-clear audio with less than 3ms latency and a full 20Hz-20kHz frequency range
- Rechargeable battery that lasts 4-6 hours with USB-C charging
Free USA Shipping
60 Day Money-Back Guarantee
1 Year Warranty
Ditch the floor wedges and cut the cord. AirSync IEM delivers professional UHF wireless monitoring at a price working musicians can actually afford. With plug-and-play setup, 150-foot range, and zero WiFi interference, you'll experience the freedom to move, perform, and connect with your audience β every night, every venue.
- Professional UHF Frequency (657-663 MHz): Operates in a dedicated band that doesn't compete with WiFi, Bluetooth, or wireless instruments β no dropouts when your venue fills up
- 150-Foot Working Range: Cover larger stages with room to spare β 67% more range than compact 2.4GHz systems
- Under 3ms Latency: Imperceptible delay β sounds and feels like you're plugged in direct
- 13 Available Channels: Run up to 13 simultaneous systems for full band monitoring, or pair multiple receivers to a single transmitter for shared mixes
- Visual AF Meters: Integrated on both transmitter and receiver for optimal gain staging β avoid clipping and dial in clean levels at a glance
- Factory-Paired Plug & Play: Power on both units and they sync automatically β no frequency coordination needed for single-system use
- Independent Volume Control: Receiver volume knob preserves your preferred level between power cycles
- Integrated Belt Clip: Secure receiver attachment built in β no accessories to buy or lose
- Hardshell Carrying Case Included: Professional protection for transport β not a cheap soft bag
- FCC Certified: Meets all federal requirements for UHF wireless transmission
- Wireless transmitter (XLR female input)
- Wireless receiver with integrated belt clip (3.5mm output)
- USB-C charging cable
- XLR male to 1/4" TS adapter
- Hardshell carrying case
- Quick start guide
Note: Works with any standard 3.5mm earphones or IEMs (not included)
π Table of Contents
- Quick Start Guide
- What's Included
- Controls and Features
- Locking/Unlocking Frequencies
- Charging
- Built-in Limiter
- Specifications
- FAQ
β Quick Start Guide
- Power on: Press and hold the power button for 2 seconds on both transmitter and receiver. Units will auto-sync and display solid wireless signal bars.
- Connect transmitter: Plug the transmitter into your audio source (mixing console, headphone amp, etc). Use included XLRβΒΌβ adapter if needed.
- Connect receiver: Plug earphones into receiverβs 3.5mm output.
- Adjust wireless frequency (if needed): Double-click transmitter power button to cycle through frequencies. The receiver follows automatically if unlocked.
- Adjust audio source output: Set source output until transmitter AF meter shows ~75% without clipping.
- Adjust receiver volume: Use receiver volume knob. Start low and increase gradually.
- Units are factory-paired. Frequency locking is only required when using multiple systems.
π¦ What's Included
- Wireless transmitter
- Wireless receiver with belt clip
- USB-C charging cable
- XLR male to ΒΌ" TS adapter
- Hardshell carrying case
ποΈ Controls and Features
Transmitter
- XLR Input: Connect line-level audio source (mixer send, aux output, etc.)
- Power Button: Hold 2s to power on/off; double-click to change frequency
- LCD Display: Shows frequency, battery, AF meter, signal strength
- USB-C Port: Charges 950mAh battery (5V/1A)
Receiver
- 3.5mm Output: Connect any standard earphones or IEMs
- Volume Knob: Clockwise to increase, counterclockwise to decrease
- Power Button: Hold 2s to power on/off; press three times to engage or disengage the built-in limiter
- LCD Display: Shows frequency, battery, AF meter, signal strength
- Belt Clip: Integrated for secure attachment
- USB-C Port: Charges 950mAh battery (5V/1A)
π Locking/Unlocking Frequencies
How Automatic Frequency Matching Works
By default, AirSync IEM receivers automatically sync to the nearest transmitter when powered on. This allows simple plug-and-play operation for single-system use.
When to Use Frequency Locking
- Using multiple AirSync IEM systems simultaneously
- Performing near other AirSync users
- Ensuring receivers only connect to specific transmitters
Once locked, receivers will only connect to their paired transmitter.
System Capabilities: Up to 13 transmitters on different channels. Multiple receivers can lock to one transmitter.
Lock Process
- Setup: Turn off all other AirSync devices before starting.
- Step 1: Hold transmitter power until screen blanks and flashes, then press once. Display shows βLOCKβ.
- Step 2: Within 10 seconds, hold receiver power until screen shows βLOCKβ. Repeat for each receiver.
- Step 3: While all screens flash βLOCKβ, press transmitter power once to confirm.
- Success: All units return to normal and display same channel.
Unlock Process
- Step 1: Hold transmitter power until display flashes, then press twice. Display shows βUNLOCKβ.
- Step 2: Within 10 seconds, hold receiver power until βUNLOCKβ appears. Repeat for each receiver.
- Step 3: While flashing, press transmitter once to confirm unlock.
- Success: Receivers now auto-sync to any available transmitter.
π Quick Reference
Lock when using multiple systems to keep each receiver tied to its transmitter. Unlock to allow auto-sync to any transmitter.
| Action | Transmitter Button Press | Result |
|---|---|---|
| Lock | Hold β Press ONCE β Sync receivers β Press once to confirm | Dedicated pairing |
| Unlock | Hold β Press TWICE β Sync receivers β Press once to confirm | Auto-sync enabled |
Common Locking Mistakes
- β Donβt power receivers before transmitter shows βLOCK/UNLOCKβ
β Wait for flashing before syncing receivers - β Donβt delay between receivers (10s timeout)
β Work quickly through all receivers - β Donβt forget the final transmitter press
β Always confirm to complete process
π Charging
- Battery: 3.7V 950mAh Li-ion
- Battery Life: 5β6 hours (varies by use)
- Charge Time: 2β3 hours via USB-C (5V/1A)
- Low Battery Warning: Appears with ~1 hour remaining
- Both units can charge simultaneously and operate while charging.
π‘οΈ Built-in Limiter
The built-in limiter helps protect your hearing by reducing sudden volume spikes and overly saturated signal peaks before they reach your earphones.
- Engage limiter: Press the receiver power button three times
- Disengage limiter: Press the receiver power button three times again
Use the limiter when you want extra protection from unexpected loud transients or hot monitor mixes.
βοΈ Specifications
| Specification | Value |
|---|---|
| Frequency Band | 657β663 MHz |
| Channels | 13 |
| Latency | <3 ms |
| Frequency Response | 20Hzβ20kHz |
| Working Range | Up to 150 ft |
| Battery Life | 5β6 hours |
| Transmitter Power | 3β8 mW |
| SNR | >95 dB |
| Transmitter Input | XLR female (line level) |
| Receiver Output | 3.5mm TRS stereo |
| Simultaneous Systems | Up to 13 transmitters |
| Receivers per Transmitter | Multiple |
Frequently Asked Questions
β’ Start with low volume
β’ Avoid moisture or heat
Support: codamusictech.com/support
Shipping
- Free standard shipping on all US orders
- Orders placed before 2 PM PST ship same day
- Most US customers receive their order within 2-3 business days
- Tracking provided within 24 hours of shipment
Returns & Guarantee
- 60-day money-back guarantee - no questions asked
- Try it at rehearsals, gigs, and different venues
- If it doesn't outperform your current monitoring setup, send it back for a full refund
I recently bought one of the competitor wireless IEM units that was more expensive than my his unit and it had nothing but drop outs for me even standing 10 feet from the transmitter. Then I tried the Air Sync IEM and I havenβt had one issue with it! I absolutely recommend this unit for an awesome budget IEM!
Well built, solid, feels like quality. Works great and multiple receivers can pair to the same transmitter (if desired).
I donβt think itβs ever dropped out and the volume control is easy to reach. Good product I bought a second one for my bandmate
Easy set-up and installation right out of the professionally designed package. They sound very good and comfortable wearing them for 3-4 hour gigs. However, my needs may be different from other users as I prefer on some gigs to EQ the monitors specifically to the sensitivity of my ears. If a separate EQ option were available through Coda, specifically designed for use with their monitors, I may choose purchase this option as well.
Makes my monitoring easy