Why fit matters: Proper fit directly affects sound quality, bass response, and noise isolation. An improper seal is the most common cause of "thin" or "weak" sound.

How to test your seal:

• Insert the earphones and play music at low volume
• Gently press on the earphones — if sound quality improves significantly, you need a larger tip size or deeper insertion
• A good seal should reduce ambient noise by up to 36dB

Tips for best results:

• Try all three tip sizes — most people don’t use the size they expect
• Insert the tip fully into your ear canal, not just resting at the entrance
• The over-ear cable loop should sit comfortably without pressure
• Use the cinch behind your head to prevent cable pull from affecting the seal

Compatible with:

• AirSync G2 Wireless IEM System
• IEM-1, IEM-1R, IEM-Pro Wired Monitoring Systems
• Any in-ear monitoring system with 3.5mm output
• Smartphones, tablets, laptops, and audio interfaces

Cable details:

• 5ft (1.5m) high-purity oxygen-free copper cable
• 3.5mm TRS termination
• Standard 2-pin detachable connector (compatible with standard replacement cables)

After each use:

• Wipe earphones and ear tips with a dry, soft cloth
• Store in the included hard-shell case to prevent damage

Ear tips:

• Remove and clean ear tips periodically with mild soap and water
• Allow tips to dry completely before reattaching
• Replace ear tips if they become worn, torn, or no longer seal properly

Cable:

• Avoid sharp bends or kinks in the cable
• Disconnect by gripping the connector, not pulling the cable
• When storing, loosely coil the cable — do not wrap tightly

What to avoid:

• Exposure to extreme heat or moisture
• Sharing earphones without cleaning (hygiene)
• Forcing connectors — they should attach with gentle pressure