MB-Stealth In-Line Microphone Preamp Booster Manual

Instructions

  1. Connection: Plug the MB-Stealth into your dynamic or ribbon microphone.
  2. Setup: Connect an XLR cable from the Stealth to your audio interface.
  3. Activation: Turn on phantom power on your audio interface.
  4. Adjustment: Slowly turn up the gain to the desired level.

Important Notes

  • Designed for use with passive ribbon and dynamic microphones only.
  • Not suitable for use with condenser microphones.
  • Requires 48V external phantom power.

Specifications

  • Gain: 28dB (load 1kΩ)
  • Frequency Response: 20 Hz - 20 kHz
  • Max Output Level: 8.3 dBv (0.5% THD)
  • Output Impedance: 135 ohms

Frequently Asked Questions

Does the MB-Stealth work with condenser microphones?
No, the MB-Stealth is not designed to work with condenser microphones. It is specifically intended for use with passive ribbon and dynamic microphones only. Connecting it to a condenser mic may cause damage.
What microphones can I use with the MB-Stealth?
The MB-Stealth is designed for use with passive ribbon and dynamic microphones only. It is not suitable for use with condenser microphones.
Does the MB-Stealth require phantom power?
Yes, the MB-Stealth requires 48V external phantom power to operate. Make sure your audio interface or mixer can provide this.
How much gain does the MB-Stealth provide?
The MB-Stealth offers 28dB of gain when connected to a 1kΩ load.
What is the frequency response?
The MB-Stealth has a flat frequency response of 20 Hz to 20 kHz.
What is the maximum output level?
The maximum output level is 8.3 dBv at 0.5% THD.
What is the output impedance?
The output impedance of the MB-Stealth is 135 ohms.
Need human help?
Contact our support team at www.codamusictech.com/contact-us. We're musicians and we're here to assist you.